Using driveexecutive to configure drive module – Rockwell Automation 1756-DMF30 ControlLogix Drive Module User Manual

Page 60

Publication 1756-UM522B-EN-P - February 2003

5-16

Configuring the Drive Module

Using DriveExecutive to
Configure Drive Module

Configure the Drive Module’s Peer Communication

On the SynchLink Setup Tab

Select the Receive

and Transmit Formats

Configure the

Multiplier Block

Select source

parameters for

Buffered Data

transmissions

Select source
parameters for
Direct Data, if
the sources are
drive
parameters

Click SynchLink Node Configuration to open

SynchLink Node Configuration Window

The settings you make on this tab determine what the
module does during every SynchLink Update cycle

Select sources
for Direct Data

transmissions

Select Peer

Communication from

Drive Menu

This manual is related to the following products: