Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 299)

Publication 1756-UM522B-EN-P - February 2003
1756-DMF30 Specific Information C-47
1013 SL Rx DirectSel2
Determines the destination for the data received at word 2 of
direct received data. Configure the selection by using the Peer
Communication window. Default: Val 0 No Data
Options: Val 0
Val 1
Val 2
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Val 9
Val 10 No Data
SL Multiply
Event P0
Event P1
Event D0
Event D1
Event D2
Event D3
Event Opt0
Event Opt1
Event Status
File:
Group: SynchLink
SynchLink Config
1014 SL Rx DirectSel3
Determines the destination for the data received at word 3 of
direct received data. Configure the selection by using the Peer
Communication window. Default: Val 0 No Data
Options: Val 0
Val 1
Val 2
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Val 9
Val 10 No Data
SL Multiply
Event P0
Event P1
Event D0
Event D1
Event D2
Event D3
Event Opt0
Event Opt1
Event Status
File:
Group: SynchLink
SynchLink Config
1020 SL Tx Comm Frmt
Defines the node's communication format for transmitting
SynchLink data. This determines the number of axis data
words, direct data words and buffered data words transmitted.
Configure the format by using the Peer Communication
window. Value Axis Direct Buffered
Options: Val 0 0 0 0
File:
Group: SynchLink
SynchLink Config
No. Name
Description Values