Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 134)

Publication 1756-UM522B-EN-P - February 2003
B-54 1756-DMD30 Specific Information
177 Setpt 2 Limit
Creates a tolerance - hysteresis band around the value in
parameter 176 [Setpt2 TripPoint]. For positive setpoints:
Turn-on level = TripPoint, Turn-off level = TripPoint - Limit. For
negative setpoints: Turn-on level = TripPoint, Turn-off level =
TripPoint + Limit. Units:
Default:
Min:
Max:
Type:
File:
Group: P.U.
0.01
0
0.5
Linkable, Read-Write, Floating Point
Speed Control
Setpoint Monitor
180 PI Output
The final output of the Process Control regulator. A value of 1
can represent either base motor speed, motor rated torque, or
100% for some external function. Units:
Default:
Min:
Max:
Type:
File:
Group: P.U.
0
-8
8
Non-Linkable, Read Only, Floating Point
Process Control
Regulator
181 PI Reference
The reference input for the process control regulator. A value
of 1 can represent either base motor speed, motor rated
torque, or 100% for some external function. Units:
Default:
Min:
Max:
Type:
File:
Group: P.U.
0
-8
8
Linkable, Read-Write, Floating Point
Process Control
Process Config
182 PI Feedback
The feedback input for the process control regulator. A value
of 1 can represent either base motor speed, motor rated
torque, or 100% for some external function. Units:
Default:
Min:
Max:
Type:
File:
Group: P.U.
0
-8
8
Linkable, Read-Write, Floating Point
Process Control
Process Config
No. Name
Description Values