Rockwell Automation 1756-DMF30 ControlLogix Drive Module - Manual (Page 104)

Publication 1756-UM522B-EN-P - February 2003
B-24 1756-DMD30 Specific Information
Parameter Data In Linear List Format
No. Name
Description Values
10 Speed Ref 1
Provides the speed reference that the drive uses when
selected by parameter 16 [Speed Ref Sel]. A value of 1.0
represents base speed of the motor.
Default:
Min:
Max:
Type:
File:
Group: 0.0000
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Speed Control
Reference
11 Spd Ref1 Divide
Parameter 10 [Speed Ref 1] is divided by this number. Use this
parameter to scale the value of Speed Ref 1.
Default:
Min:
Max:
Type:
File:
Group: 1.0000
-2200000000
2200000000
Non-Linkable, Read-Write, Floating Point
Speed Control
Reference
12 Speed Ref 2
Provides the speed reference that the drive uses when
selected by parameter 16 [Speed Ref Sel]. A value of 1.0
represents base speed of the motor.
Default:
Min:
Max:
Type:
File:
Group: 0.0000
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Speed Control
Reference
13 Spd Ref2 Multi
Parameter 12 [Speed Ref 2] is multiplied by this number. Use
this parameter to scale the value of Speed Ref 2.
Default:
Min:
Max:
Type:
File:
Group: 1.0000
-2200000000
2200000000
Linkable, Read-Write, Floating Point
Speed Control
Reference
14 Speed Ref 4
Provides the speed reference that the drive uses when
selected by parameter 16 [Speed Ref Sel]. A value of 1.0
represents base speed of the motor.
Units:
Default:
Min:
Max:
Type:
File:
Group: RPM
0.0000
-14000
14000
Linkable, Read-Write, Floating Point
Speed Control
Reference
15 Speed Ref 5
Provides the speed reference that the drive uses when
selected by parameter 16 [Speed Ref Sel]. A value of 1.0
represents base speed of the motor.
Units:
Default:
Min:
Max:
Type:
File:
Group: RPM
0.0000
-14000
14000
Linkable, Read-Write, Floating Point
Speed Control
Reference
16 Speed Ref Sel
Enter or write a value to select the source of the speed
reference to the drive.
Default: Val 1 Spd Ref 1
Options: Val 0
Val 1
Val 2
Val 3
Val 4
Val 5 Zero Speed
Spd Ref 1
Spd Ref 2
Spd Ref 3
Spd Ref 4
Spd Ref 5
File:
Group: Speed Control
Reference