Rockwell Automation 1756-DMF30 ControlLogix Drive Module User Manual
Page 183
Publication 1756-UM522B-EN-P - February 2003
1756-DMD30 Specific Information B-103
1014
SL Rx DirectSel3
Determines the destination for the data received at word 3 of
direct received data. Configure the selection by using the Peer
Communication window.
Default:
Val 0
No Data
Options:
Val 0
Val 1
Val 2
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Val 9
Val 10
No Data
SL Multiply
Event P0
Event P1
Event D0
Event D1
Event D2
Event D3
Event Opt0
Event Opt1
Event Status
File:
Group:
SynchLink
SynchLink Config
1020
SL Tx Comm Frmt
Defines the node's communication format for transmitting
SynchLink data. This determines the number of axis data
words, direct data words and buffered data words transmitted.
Configure the format by using the Peer Communication
window.
Value
Axis
Direct
Buffered
Options:
Val 0
Val 7
Val 9
Val 17
0
0
0
0
0
2
4
4
0
18
8
18
File:
Group:
SynchLink
SynchLink Config
1021
SL Tx DirectSel0
Determines the source type for the data transmitted by direct
transmit word 0. The source type selections are: no data,
event, feedback and drive parameter. If drive parameter is
selected, a parameter of the appropriate data format (integer
or real) must be linked to parameter 1141 [SL Dir Int Tx0] or
parameter 1142 [SL Dir Real Tx0]. Configure the selection by
using the Peer Communication window.
Default:
Val 0
No Data
Options:
Val 0
Val 1
Val 2
Val 3
Val 4
Val 5
Val 6
Val 7
Val 8
Val 9
Val 10
Val 11
Val 12
Val 13
Val 14
Val 15
Val 16
Val 17
Val 18
Val 19
Val 20
Val 21
Val 22
Val 23
Val 24
Val 25
Val 26
No Data
SL Multiply
Event P0
Event P1
Event D0
Event D1
Event D2
Event D3
Event Opt0
Event Opt1
Event Status
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Dir Tx Data
Dir Rx Data
E0 Accum
E1 Accum
Opt0 Accum
Opt1 Accum
File:
Group:
SynchLink
SynchLink Config
No.
Name
Description
Values