Rockwell Automation 1756-DMF30 ControlLogix Drive Module User Manual
Page 225
Publication 1756-UM522B-EN-P - February 2003
1756-DMD30 Specific Information B-145
2130
Counter EMF
Displays the measured counter-EMF voltage, in volts.
Units:
Default:
Min:
Max:
Type:
File:
Group:
Volt
0
-32768
32767
Non-Linkable, Read Only, Floating Point
DPS/PMI
Feedback
2131
FML Feedback
Displays measured field current. A value of 4095 indicates hot
field current - equal to the value of parameter 2185 [Hot Field
Curr].
Units:
Default:
Min:
Max:
Type:
File:
Group:
P.U.
0
-4095
4095
Non-Linkable, Read Only, 16-bit Integer
Speed/Posit Fdbk
Resolver
2132
Field Amps Fdbk
Displays measured field current in Amps.
Units:
Default:
Min:
Max:
Type:
File:
Group:
Amps
0
-32768
32767
Non-Linkable, Read Only, Floating Point
DPS/PMI
Feedback
2133
Field Volt Fdbk
Displays the field voltage feedback value, in volts. This voltage
is calculated based on the AC line voltage and field firing
angle.
Units:
Default:
Min:
Max:
Type:
File:
Group:
Volt
0
-32768
32767
Non-Linkable, Read Only, Floating Point
DPS/PMI
Feedback
2134
User Anlg Input
Displays the measured user analog input value from the
Resolver Feedback connector on the Resolver & Drive l/O
module. This value may be accessed through the PMI meter
ports.
Default:
Min:
Max:
Type:
File:
Group:
0
-2048
2048
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI
Feedback
2135
Res Scan Posit
Displays the electrical position of the resolver (if used). This
register is reset to zero at power-up.
Default:
Min:
Max:
Type:
File:
Group:
0
-32768
32767
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI, DPS/PMI
Feedback, Regulator Config
2136
Res Strobe Posit
Displays the electrical position of the resolver at the time a
strobe signal is detected.
Default:
Min:
Max:
Type:
File:
Group:
0
-32768
32767
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI
Regulator Config
2137
Arm Volt FB Cnts
Displays measured armature voltage. A value of 4095
indicates armature voltage - equal to Rated Armature voltage.
Default:
Min:
Max:
Type:
File:
Group:
0
-4095
4095
Non-Linkable, Read Only, 16-bit Integer
DPS/PMI
Regulator Config
No.
Name
Description
Values