Rockwell Automation 1756-DMF30 ControlLogix Drive Module User Manual
Page 330
Publication 1756-UM522B-EN-P - February 2003
C-78 1756-DMF30 Specific Information
2012
DM Sync Count
Displays the value of an internal counter that synchronizes the
Drive Module and PMI processor.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Non-Linkable, Read-Only, 16-Bit Integer
DPS/PMI
Comm Status
2013
PMI Gain Count
Displays the number of gain messages sent on Drive
Communication. This is a 16-bit value that rolls over when it
reaches its maximum.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Non-Linkable, Read-Only, 16-Bit Integer
DPS/PMI
Comm Status
2014
DM Tx Time
Displaysf the value of parameter 2012 [DM Sync Count] when
the Drive Module finished transmitting a set point message.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Non-Linkable, Read-Only, 16-Bit Integer
DPS/PMI
Comm Status
2015
DM Tx Time Avail
Displays the value of theparameter 2012 [DM Sync Count]
when the Drive Module receives a feedback message. This is
a good indication of the amount of remaining bandwith on
Drive Communication.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Non-Linkable, Read-Only, 16-Bit Integer
DPS/PMI
Comm Status
2040
Rail Port 0 Ch 0
Enter the code for the type of Rail I/O on each channel. Refer
to section 3.1, “Rail I/O Port Registers”, of Reliance Electric
publication 3036, Distributed Power System SF3000 Drive
Configuration and Programming.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Linkable, Read-Write, 16-Bit Integer
DPS/PMI
Inputs & Outputs
2041
Rail Port 0 Ch 1
Enter the code for the type of Rail I/O on each channel. Refer
to section 3.1, “Rail I/O Port Registers”, of Reliance Electric
publication 3036, Distributed Power System SF3000 Drive
Configuration and Programming.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Linkable, Read-Write, 16-Bit Integer
DPS/PMI
Inputs & Outputs
2042
Rail Port 0 Ch 2
Enter the code for the type of Rail I/O on each channel. Refer
to section 3.1, “Rail I/O Port Registers”, of Reliance Electric
publication 3036, Distributed Power System SF3000 Drive
Configuration and Programming.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Linkable, Read-Write, 16-Bit Integer
DPS/PMI
Inputs & Outputs
2043
Rail Port 0 Ch 3
Enter the code for the type of Rail I/O on each channel. Refer
to section 3.1, “Rail I/O Port Registers”, of Reliance Electric
publication 3036, Distributed Power System SF3000 Drive
Configuration and Programming.
Default:
Min:
Max:
Type:
File:
Group:
0
0
65535
Linkable, Read-Write, 16-Bit Integer
DPS/PMI
Inputs & Outputs
No.
Name
Description
Values