Preface, Who should use this manual, Purpose of this manual – Rockwell Automation 1756-DMF30 ControlLogix Drive Module User Manual
Page 11: About this preface

1
Publication 1756-UM522B-EN-P - February 2003
Preface
About This Preface
This preface describes how to use this manual. The following table
describes what this preface contains and its location.
Who Should Use This
Manual
You must be able to program and operate an Allen-Bradley
Control
Logix
™ Logix controller and ControlLogix I/O modules to
efficiently use your Drive module.
We assume that you know how to do this in this manual. If you do
not, refer to Related Documentation, before you attempt to use this
module.
Purpose of This Manual
This manual describes how to install, configure, and troubleshoot
your ControlLogix Drive module.
For information about:
See page:
Related Products and Documentation
IMPORTANT
SynchLink must be used in conjunction with a standard
control network, such as ControlNet or Ethernet. A
standard network is used for general control interlocking
and transfer of diagnostic data across the system.
SynchLink does not function as a standard control network
(e.g. it broadcasts data in a unidirectional manner).