Rockwell Automation 1336T FORCE Series B - Manual (Page 15)

Chapter 1
Introduction
1–3
•
Encoderless Speed Regulation – 1% of Top Speed over a 40:1 Speed
Range.
•
Accel/Decel – Independently programmable accel and decel times.
Program from 0 to 6553 seconds in 0.1 second increments.
•
Current Limit – Independent Motoring and Regenerative Limit
•
Inverse Time Overload Capability – Class 20 protection with
speed–sensitive response. Adjustable from 0–200% of rated output
current in 3 speed ranges – 2:1, 4:1 & 10:1. UL Certified – Meets
NEC Article 430.
Options
•
Standard Adapter Board which provides:
– 2 Analog Inputs +/–10V
– 2 Analog Outputs +/– 10V
– One 4–20mA input
– One 4–20mA output
– 5 or 12 vdc pulse input
– +/– 10V reference voltages
– At Speed, Run, Fault and Alarm contacts
•
PLC Communication Adapter Board which provides:
– 4 Analog Inputs +/–10V
– 4 Analog Outputs +/– 10V
– +/– 10V Reference voltages
– RIO/DH
TM + Communications (2 channels selectable)
– Function Blocks
•
DriveTools TM; PC Windows TM based programming software
compatible with the 1336 FORCE Drive and also other
Allen–Bradley 1336 and 1395 products.
•
Dynamic Braking
•
AC Motor Contactor
Protective Features The 1336 FORCE Drive incorporates the following protective measures:
•
Programmable Motor Overload Protection (I 2 T) investigated by UL
to comply with NEC Article 430.
•
Programmable Inverter Overload Protection (IT)
•
Overspeed Detection, even when operating as a torque follower.
•
Programmable Stall Detection
•
Peak output current monitoring to protect against excessive current
at the output due to a phase to ground or phase to phase short.
•
Ground fault monitoring
•
DC Bus Voltage monitoring to protect against under/over voltage
conditions.
•
Power Structure Heatsink Temperature Monitoring