Rockwell Automation 1336T FORCE Series B - Manual (Page 13)

Chapter
1
1–1
Introduction
Manual Objectives The purpose of this manual is to provide the user with the necessary
information to install, program, start up and maintain the 1336 FORCE
Digital AC Drive. This manual should be read in its entirety before
operating, servicing or initializing the 1336 FORCE Drive.
Who Should Use This Manual This manual is intended for qualified service personnel responsible for
setting up and servicing the 1336 FORCE AC Drive. You must have
previous experience with and a basic understanding of electrical
terminology, programming procedures, required equipment and safety
precautions before attempting any service on the 1336 FORCE Drive.
ATTENTION: Only personnel familiar with the 1336
FORCE Drive and the associated machinery should plan or
implement the installation, start–up, and subsequent
maintenance of the Drive. Failure to comply may result in
personal injury and/or equipment damage.
!
!
ATTENTION: An incorrectly applied or installed Drive
can result in component damage or a reduction in product
life. Wiring or application errors such as undersizing the
motor, incorrect or inadequate AC supply or excessive
ambient temperatures may result in damage to the Drive or
motor.
!
ATTENTION: This Drive contains ESD (Electrostatic
Discharge sensitive parts and assemblies. Static control
precautions are required when installing, testing, servicing
or repairing this assembly. Component damage may result
if ESD control procedures are not followed. If you are not
familiar with static control procedures, reference
Allen–Bradley Publication 8000–4.5.2, Guarding against
Electrostatic Damage or any other applicable ESD
protection handbook.
Terminology Detailed definitions of industrial automation and technical terms used
throughout this manual may be found in the INDUSTRIAL
AUTOMATION GLOSSARY – a guide to Allen–Bradley technical
terms, Publication AG–7.1.