Rockwell Automation 25-COMM-D PowerFlex 525 DeviceNet Adapter - Manual (Page 38)

38 Rockwell Automation Publication 520COM-UM002A-EN-E - April 2013
Chapter 4 Configuring the I/O
Using RSNetWorx for DeviceNet Software to Configure and Save the
I/O Configuration to the Scanner
After adding the scanner to the I/O configuration, you must configure and save
the I/O to the scanner.
1. Start RSNetWorx for DeviceNet software.
2. From the File menu, choose New to start a new configuration.
3. From the Network menu, choose Online to display the Browse for
Network dialog box.
4. Expand the communication path from your computer to the DeviceNet
scanner.
The following dialog box shows our example navigating to devices on a
DeviceNet network. Depending on the communication link you are using,
the navigation path may be different.
5. Click OK after selecting a valid path to the DeviceNet network (for this
example, Port 2, DeviceNet).
If a message box appears about uploading or downloading information,
click OK.