Warning, Operation – SkyTrak 3606 Operation Manual User Manual
Page 68
66
3606 Rev 11/99
Operation
6. Place the travel select lever in (N) NEUTRAL, engage the parking
brake switch and exit the vehicle using both hand holds.
7. Lift the quick attach lever. Insert the quick attach pin completely
through the attachment and the quick attach link. Be sure that the
quick attach lock lever has lowered and seated itself into the groove
in the quick attach pin.
8. Return to the cab, fasten the seat belt and resume operation.
Manually Operated Pressure Release Valve
(Figure 43)
The pressure release is located in the rear of the vehicle and is used to
release pressure before connecting or disconnecting the optional Auxiliary
Hydraulic Couplings.
Before connecting or disconnecting the optional Auxiliary Hydraulic
Couplings, it is important to manually release pressure trapped within the
auxiliary hydraulic system.
1. Bring the vehicle to a complete stop using the service brakes.
2. Park the vehicle on level ground.
3. Place the travel select lever in (N) NEUTRAL and engage the park-
ing brake switch.
4. Lower the boom and ground the carriage or attachment.
5. The vehicle can remain running during this procedure or shut down
by turning the ignition key to the OFF position.
6. Exit the vehicle using the hand holds and open the rear cover.
7. On the right side of the valve plate (Figure 43) is a manually oper-
ated release valve.
WARNING
DO NOT operate this vehicle unless you are in the seat with the seat
belt fastened around you. Serious injury or death could result if the belt
is not securely fastened.
OS2140
66
3606 Rev 11/99
Operation
6. Place the travel select lever in (N) NEUTRAL, engage the parking
brake switch and exit the vehicle using both hand holds.
7. Lift the quick attach lever. Insert the quick attach pin completely
through the attachment and the quick attach link. Be sure that the
quick attach lock lever has lowered and seated itself into the groove
in the quick attach pin.
8. Return to the cab, fasten the seat belt and resume operation.
Manually Operated Pressure Release Valve
(Figure 43)
The pressure release is located in the rear of the vehicle and is used to
release pressure before connecting or disconnecting the optional Auxiliary
Hydraulic Couplings.
Before connecting or disconnecting the optional Auxiliary Hydraulic
Couplings, it is important to manually release pressure trapped within the
auxiliary hydraulic system.
1. Bring the vehicle to a complete stop using the service brakes.
2. Park the vehicle on level ground.
3. Place the travel select lever in (N) NEUTRAL and engage the park-
ing brake switch.
4. Lower the boom and ground the carriage or attachment.
5. The vehicle can remain running during this procedure or shut down
by turning the ignition key to the OFF position.
6. Exit the vehicle using the hand holds and open the rear cover.
7. On the right side of the valve plate (Figure 43) is a manually oper-
ated release valve.
WARNING
DO NOT operate this vehicle unless you are in the seat with the seat
belt fastened around you. Serious injury or death could result if the belt
is not securely fastened.
OS2140