SkyTrak 3606 Operation Manual - Manual (Page 21)

Operation
3606 Rev 11/99 19
Figure 6
Ignition Switch
(Figure 7)
Using the ignition switch key, the switch may be turned clockwise from the
OFF position to the RUN, PREHEAT and START positions. The PREHEAT
and START positions are spring-loaded to return to the RUN position and
must be manually held in place for starting.
OFF position — The entire electrical system is shut down.
RUN position — All controls and indicators are operable.
PREHEAT position — Optional (Perkins) - Preheats air in the induction
manifold for cold weather starting (see “Cold Starting” on page 45).
START position — Engages starter motor to crank the engine when the
parking brake switch is engaged and the transmission is in NEUTRAL.
Figure 7
OS1120
Steering
Wheel - Ref.
Tilt Steering
Wheel Lever
OF0390
OFF RUN
PREHEAT
START
Operation
3606 Rev 11/99 19
Figure 6
Ignition Switch
(Figure 7)
Using the ignition switch key, the switch may be turned clockwise from the
OFF position to the RUN, PREHEAT and START positions. The PREHEAT
and START positions are spring-loaded to return to the RUN position and
must be manually held in place for starting.
OFF position — The entire electrical system is shut down.
RUN position — All controls and indicators are operable.
PREHEAT position — Optional (Perkins) - Preheats air in the induction
manifold for cold weather starting (see “Cold Starting” on page 45).
START position — Engages starter motor to crank the engine when the
parking brake switch is engaged and the transmission is in NEUTRAL.
Figure 7
OS1120
Steering
Wheel - Ref.
Tilt Steering
Wheel Lever
OF0390
OFF RUN
PREHEAT
START