General maintenance – SkyTrak 3606 Operation Manual User Manual
Page 118

116
3606 Rev 11/99
General Maintenance
Figure 73
7. Remove the oil filter and clean the filter sealing surface.
8. Apply a thin coat of clean engine oil to the new filter mating surface.
9. Install the new oil filter and hand tighten. Use an oil filter wrench or
strap to tighten the filter down another 1/4 to 1/2 turn.
10. Clean and reinstall the drain plug into the oil pan.
11. Remove the engine oil fill cap and add 15W40 or 10W30 motor oil.
(Refer to engine manufacturers manual for recommended oil type
for various conditions.) Engine oil capacity with filter change is:
Perkins Engine ..............................9.0 quarts (8,5 liters)
Cummins Engine .......................11.6 quarts (11,0 liters)
OS0462
(CUMMINS ENGINE)
S/N 9179 and Before
(PERKINS ENGINE)
Dipstick
Oil
Drain
Plug
Oil Filter
(Opposite
Side of
Engine)
Oil Fill Cap
Oil Fill
Cap
Oil
Filter
(CUMMINS ENGINE)
S/N 9180 and After
Oil
Drain Plug
Oil
Drain Plug
Dipstick
Dipstick
Oil Filter
Oil Fill
Cap
116
3606 Rev 11/99
General Maintenance
Figure 73
7. Remove the oil filter and clean the filter sealing surface.
8. Apply a thin coat of clean engine oil to the new filter mating surface.
9. Install the new oil filter and hand tighten. Use an oil filter wrench or
strap to tighten the filter down another 1/4 to 1/2 turn.
10. Clean and reinstall the drain plug into the oil pan.
11. Remove the engine oil fill cap and add 15W40 or 10W30 motor oil.
(Refer to engine manufacturers manual for recommended oil type
for various conditions.) Engine oil capacity with filter change is:
Perkins Engine ..............................9.0 quarts (8,5 liters)
Cummins Engine .......................11.6 quarts (11,0 liters)
OS0462
(CUMMINS ENGINE)
S/N 9179 and Before
(PERKINS ENGINE)
Dipstick
Oil
Drain
Plug
Oil Filter
(Opposite
Side of
Engine)
Oil Fill Cap
Oil Fill
Cap
Oil
Filter
(CUMMINS ENGINE)
S/N 9180 and After
Oil
Drain Plug
Oil
Drain Plug
Dipstick
Dipstick
Oil Filter
Oil Fill
Cap