Operation – SkyTrak 3606 Operation Manual User Manual
Page 61

Operation
3606 Rev 11/99
59
Stopping Travel
1. Apply the service brake pedal and downshift the vehicle to a lower
gear if necessary to slow the vehicle until it comes to a complete
stop.
2. Move the travel select lever to (N) NEUTRAL and engage the park-
ing brake switch.
Steering Modes
(Figure 37)
The vehicle can be operated in one of three steering modes:
• Four Wheel Steering
• Front Wheel Steering
• Crab Steering
The steering mode can be changed by a three position toggle switch
located on the right console below the arm rest.
IMPORTANT! DO NOT change steering modes unless you are at a
complete stop and all four tires are in the “straight-ahead” position.
Figure 37
Four
Wheel
Steering
Front
Wheel
Steering
Crab
Steering
STEERING SELECT SWITCH
OS1411
Steering Selection Indicators
Operation
3606 Rev 11/99
59
Stopping Travel
1. Apply the service brake pedal and downshift the vehicle to a lower
gear if necessary to slow the vehicle until it comes to a complete
stop.
2. Move the travel select lever to (N) NEUTRAL and engage the park-
ing brake switch.
Steering Modes
(Figure 37)
The vehicle can be operated in one of three steering modes:
• Four Wheel Steering
• Front Wheel Steering
• Crab Steering
The steering mode can be changed by a three position toggle switch
located on the right console below the arm rest.
IMPORTANT! DO NOT change steering modes unless you are at a
complete stop and all four tires are in the “straight-ahead” position.
Figure 37
Four
Wheel
Steering
Front
Wheel
Steering
Crab
Steering
STEERING SELECT SWITCH
OS1411
Steering Selection Indicators