Operation – SkyTrak 3606 Operation Manual User Manual

Page 42

3606 Rev 11/99

Operation

Power Window

(Figure 26)

The power window control is a momentary toggle switch that will raise or
lower the cab door window when the ignition is in the RUN position. To
lower the window, toggle the switch downward to the desired position then
release the switch.

NOTE: The window will not lower entirely into the door; it will stop approxi-
mately half way down and not go any further.

To raise the window, toggle the switch upward to the desired position and
then release the switch.

Figure 26

Rear Window Latches

(Figure 27)

The rear window can be partially opened and secured in place with the rear
window latches. To open the window, grab both latch handles
simultaneously and pull up and then push the window outward. To close
and secure the window, pull both latch handles up and then inward.

NOTE: In an emergency situation, the operator can exit through the rear
window opening by removing the latch pins on both window latches. The
window is then free to swing open.

OS1850

OS1800

Cab

Door

Power

Window

Switch

Door

Latch

(Ref.)

3606 Rev 11/99

Operation

Power Window

(Figure 26)

NOTE: The window will not lower entirely into the door; it will stop approxi-
mately half way down and not go any further.

To raise the window, toggle the switch upward to the desired position and
then release the switch.

Figure 26

Rear Window Latches

(Figure 27)

NOTE: In an emergency situation, the operator can exit through the rear
window opening by removing the latch pins on both window latches. The
window is then free to swing open.

OS1850

OS1800

Cab

Door

Power

Window

Switch

Door

Latch

(Ref.)