SkyTrak 3606 Operation Manual - Manual (Page 131)

General Maintenance
3606 Rev 11/99 129
B. Hydraulic Oil & Filter Change
(First 50 Hours - Filter Only)
(1000 Hour Intervals - Oil & Filter)
Change the hydraulic oil filter after the first 50 hours of operation and
change the hydraulic oil and filter every 1000 hours of operation thereafter.
The hydraulic filter must be changed anytime the hydraulic oil filter
restriction warning indicator light begins to flicker ON and OFF at a high
idle. See page 34 for the location of this light on the display panel.
1. Level the vehicle, ground the carriage, place the travel select lever
in (N) NEUTRAL, engage the parking brake switch.
2. Fully retract all hydraulic cylinders and shut off the engine.
3. Unlatch, unlock and open the engine cover. Allow the oil to cool.
4. Clean around the hydraulic filter head (Figure 85). Loosen but do
not remove the nuts that secure the filter head to the hydraulic tank.
Figure 85
WARNING
DO NOT change the hydraulic oil or filter with the engine running.
Contact with moving parts can cause serious injury or death.
OS0840
OS1040
Hydraulic
Oil Filter
Head
General Maintenance
3606 Rev 11/99 129
B. Hydraulic Oil & Filter Change
(First 50 Hours - Filter Only)
(1000 Hour Intervals - Oil & Filter)
Change the hydraulic oil filter after the first 50 hours of operation and
change the hydraulic oil and filter every 1000 hours of operation thereafter.
The hydraulic filter must be changed anytime the hydraulic oil filter
restriction warning indicator light begins to flicker ON and OFF at a high
idle. See page 34 for the location of this light on the display panel.
1. Level the vehicle, ground the carriage, place the travel select lever
in (N) NEUTRAL, engage the parking brake switch.
2. Fully retract all hydraulic cylinders and shut off the engine.
3. Unlatch, unlock and open the engine cover. Allow the oil to cool.
4. Clean around the hydraulic filter head (Figure 85). Loosen but do
not remove the nuts that secure the filter head to the hydraulic tank.
Figure 85
WARNING
DO NOT change the hydraulic oil or filter with the engine running.
Contact with moving parts can cause serious injury or death.
OS0840
OS1040
Hydraulic
Oil Filter
Head