SkyTrak 3606 Operation Manual - Manual (Page 23)

Operation
3606 Rev 11/99 21
Parking Brake Switch
(Figure 8)
The parking brake switch has two positions:
Engaged................................ toggle switch downward
Disengaged................................toggle switch upward
The parking brake switch must be ENGAGED to permit engine starting.
The parking brake may be used to stop in an EMERGENCY situation
however, use caution because the stop will be abrupt and the operator and
the load may be jolted forward unexpectedly.
Attachment Tilt Mode Switch
(Figure 8)
The attachment tilt mode switch has two positions which allow the operator
to chose between Lift/Lower function and the Extend/Retract function
accompanying the Attachment Tilt capability. For detailed information, see
“Multi-Function Joystick Operation” starting on page 24.
P
P
OS0121
OS1323
OS2120
Operation
3606 Rev 11/99 21
Parking Brake Switch
(Figure 8)
The parking brake switch has two positions:
Engaged................................ toggle switch downward
Disengaged................................toggle switch upward
The parking brake switch must be ENGAGED to permit engine starting.
The parking brake may be used to stop in an EMERGENCY situation
however, use caution because the stop will be abrupt and the operator and
the load may be jolted forward unexpectedly.
Attachment Tilt Mode Switch
(Figure 8)
The attachment tilt mode switch has two positions which allow the operator
to chose between Lift/Lower function and the Extend/Retract function
accompanying the Attachment Tilt capability. For detailed information, see
“Multi-Function Joystick Operation” starting on page 24.
P
P
OS0121
OS1323
OS2120