Operation – SkyTrak 3606 Operation Manual User Manual

Page 37

Operation

3606 Rev 11/99

will also sound. Stop and idle the vehicle, allowing time for cooling.
If the light does not go out after five minutes, shut the vehicle down.

Figure 18

D. Hydraulic Oil Temperature Warning Indicator -

This light becomes illuminated when the hydraulic oil temperature is
too high; above 195° F (76° C). Stop and idle the engine, allow time
for cooling. If the light does not go out after five minutes, shut the
vehicle down.

E. Engine Oil Pressure Warning Indicator -

This indicator light will come ON and an audible alarm will sound
after 15 seconds if the engine is not started. This is normal. Turn
the ignition switch OFF to reset the indicator. If the light comes ON
while the engine is running, this indicates that the engine oil
pressure is too low.
SHUT THE VEHICLE DOWN AS SOON AS PRACTICAL.

F. Alternator Charging Warning Indicator -

This light becomes illuminated when the charging system is not
working properly. Service the engine alternator.

G. Engine Air Filter Restriction Warning Indicator -

This light becomes illuminated when a restricted engine air filter is
detected. If the light begins to flicker ON and OFF at high idle,
service the air filter(s).

H. Hydraulic Oil Filter Restriction Warning Indicator -

This light becomes illuminated when a restricted hydraulic oil filter is
detected. If the light begins to flicker ON and OFF at high idle,
service the hydraulic oil filter.

OS0251

Reset

Button

for

Engine

Maintenance/

Vehicle

Lubrication

Indicator