SkyTrak 3606 Operation Manual - Manual (Page 45)

Operation
3606 Rev 11/99 43
To defrost the cab:
• turn temperature control knob to far right position (RED=HOT),
• direct desired air flow by adjusting vent louvers,
• turn fan control to “3” to assure rapid defrost.
To cool the cab:
• turn A/C rocker switch to ON position,
• turn temperature control knob to far left position (BLUE=COOL),
• direct desired air flow by adjusting vent louvers,
• turn fan control to “3” to assure rapid cool-down.
1. Check safety belt for damage. Check for frayed or cut seat belt web-
bing, damaged buckles or loose mounting brackets. Make any nec-
essary repairs before operating the vehicle.
2. Check all four tires and rims for damage. Check for proper tire pres-
sure, add air if required. Observe the condition of each tire looking
specifically for punctures, cracks, cuts, gouges, bulges or any other
damage. Check the condition of each rim for bent flanges or any
other damage. Make any necessary repairs before operating the
vehicle.
3. Check and add engine oil if required. This procedure is explained in
greater detail on page 114.
4. Check and add transmission oil if required. This procedure is
explained in greater detail on page 131.
5. Check the cooling system overflow bottle for coolant. Add coolant if
required. This procedure is explained in greater detail on page 111.
Remove any debris blocking the radiator cooling fins.
6. Check the hydraulic oil level sight glass and add hydraulic oil if
required. This procedure is explained in greater detail on page 128.
7. Walk around the vehicle and check for oil leakage as well as dam-
aged or missing parts. Make any necessary repairs before operat-
ing the vehicle.
Pre-Operation Inspection
Operation
3606 Rev 11/99 43
To defrost the cab:
• turn temperature control knob to far right position (RED=HOT),
• direct desired air flow by adjusting vent louvers,
• turn fan control to “3” to assure rapid defrost.
To cool the cab:
• turn A/C rocker switch to ON position,
• turn temperature control knob to far left position (BLUE=COOL),
• direct desired air flow by adjusting vent louvers,
• turn fan control to “3” to assure rapid cool-down.
1. Check safety belt for damage. Check for frayed or cut seat belt web-
bing, damaged buckles or loose mounting brackets. Make any nec-
essary repairs before operating the vehicle.
2. Check all four tires and rims for damage. Check for proper tire pres-
sure, add air if required. Observe the condition of each tire looking
specifically for punctures, cracks, cuts, gouges, bulges or any other
damage. Check the condition of each rim for bent flanges or any
other damage. Make any necessary repairs before operating the
vehicle.
3. Check and add engine oil if required. This procedure is explained in
greater detail on page 114.
4. Check and add transmission oil if required. This procedure is
explained in greater detail on page 131.
5. Check the cooling system overflow bottle for coolant. Add coolant if
required. This procedure is explained in greater detail on page 111.
Remove any debris blocking the radiator cooling fins.
6. Check the hydraulic oil level sight glass and add hydraulic oil if
required. This procedure is explained in greater detail on page 128.
7. Walk around the vehicle and check for oil leakage as well as dam-
aged or missing parts. Make any necessary repairs before operat-
ing the vehicle.
Pre-Operation Inspection