SkyTrak 3606 Operation Manual - Manual (Page 114)

112 3606 Rev 11/99
General Maintenance
B. Drain and Flush Radiator
(2000 Hour Intervals)
1. Level the vehicle, ground the carriage, place the travel select lever
in (N) NEUTRAL, engage the parking brake switch and shut off the
engine.
2. Unlatch, unlock and open the engine cover. Allow time for the
engine to cool down before proceeding. Draining and flushing the
engine cooling system while the engine is still hot can cause cracks
in the engine block.
Figure 70
WARNING
DO NOT attempt this procedure when the engine is hot. Wait for the
engine to cool down before proceeding. Failure to do so could result in
severe burns.
OS0810
OS0472
Radiator Cap
Fitting on Neck of
Radiator Fill Tube
Hose from
Bottom of
Overflow
Bottle
Radiator Drain
Funnel
112 3606 Rev 11/99
General Maintenance
B. Drain and Flush Radiator
(2000 Hour Intervals)
1. Level the vehicle, ground the carriage, place the travel select lever
in (N) NEUTRAL, engage the parking brake switch and shut off the
engine.
2. Unlatch, unlock and open the engine cover. Allow time for the
engine to cool down before proceeding. Draining and flushing the
engine cooling system while the engine is still hot can cause cracks
in the engine block.
Figure 70
WARNING
DO NOT attempt this procedure when the engine is hot. Wait for the
engine to cool down before proceeding. Failure to do so could result in
severe burns.
OS0810
OS0472
Radiator Cap
Fitting on Neck of
Radiator Fill Tube
Hose from
Bottom of
Overflow
Bottle
Radiator Drain
Funnel