SkyTrak 3606 Operation Manual - Manual (Page 40)

38 3606 Rev 11/99
Operation
Manually Operated Pressure Release Valve
(Figure 23)
The pressure release valve is located in the rear of the vehicle and is used
to release pressure before connecting or disconnecting the optional
Auxiliary Hydraulic Couplings.
For a step by step procedure on how to manually operate the pressure
release valve, see page 66 later in this section.
Figure 23
Lights
(Figure 24)
The lights are activated with a toggle switch located in a bank of switches
on the left side of the dash. There are three positions - OFF, Front Lights
and All Lights (Front Lights & Worklight). The lights work with or without the
ignition switch in the RUN position.
Figure 24
Optional Controls
OS2140
OS0360
Manually
Operated
Release
Valve
OS1900
OS1840
Light Switch
38 3606 Rev 11/99
Operation
Manually Operated Pressure Release Valve
(Figure 23)
The pressure release valve is located in the rear of the vehicle and is used
to release pressure before connecting or disconnecting the optional
Auxiliary Hydraulic Couplings.
For a step by step procedure on how to manually operate the pressure
release valve, see page 66 later in this section.
Figure 23
Lights
(Figure 24)
The lights are activated with a toggle switch located in a bank of switches
on the left side of the dash. There are three positions - OFF, Front Lights
and All Lights (Front Lights & Worklight). The lights work with or without the
ignition switch in the RUN position.
Figure 24
Optional Controls
OS2140
OS0360
Manually
Operated
Release
Valve
OS1900
OS1840
Light Switch