To return to standby mode, press the stop button, Dialing a speed-dial number, 2 press the start/enter button to dial the number – Xerox WorkCentre 470cx-9904 User Manual
Page 99: Group dialing (for multi-address transmission), Group dialing (for multi, Address transmission)
Book
TOC
Chapter
TOC
Search
3-23
5
Press the Start/Enter
button when the name appears
correctly or without entering a name.
6
To store more telephone numbers, repeat steps 2 through 5.
Or
To return to Standby mode, press the
Stop
button
.
Dialing a Speed-Dial Number
1
Press the Speed/Dual button, then enter the two digit number
assigned to the number you wish to call.
2
Press the Start/Enter
button to dial the number.
The number is automatically dialed. If a document is loaded
into the Automatic Document Feeder, the WorkCentre 470cx
will begin transmission of the document after the remote
machine answers.
Group Dialing (for Multi-Address Transmission)
Multiple One-Touch and speed dial numbers can be registered as a
Group. By using the Group number, you can send a document to
multiple parties in a single operation. Up to ten numbers may be
stored as a Group. Your machine will dial the remote numbers in a
stored sequence. If the number is busy, your machine will dial the
next stored number and after dialing all of the stored numbers, will
Previous Page
Next Page