Receiving automatically in ans/fax mode – Xerox WorkCentre 470cx-9904 User Manual
Page 126
Book
TOC
Chapter
TOC
Search
4-6
3
If you hear a fax tone, or if the person calling asks you to
receive a fax, press the Start/Enter
button on the machine.
If the machine is equipped with an external phone, you may
also press the characters * 9 * (star-nine-star) on the external
phone to initiate reception.
Note:
The characters * 9 * (star-nine-star) are preset at the factory
as the default remote receive start code for machines operated with
a telephone connected to the EXT jack on the side of the
WorkCentre. The asterisks in the code are fixed characters, but the
number can be changed. For more information, see
4
Replace the external phone. The machine begins receiving and
returns to Standby mode when reception is complete.
Receiving Automatically in ANS/FAX Mode
To use this mode, you must attach an answering machine to the
EXT jack on the left side of your machine.
1
Press the Receive button until the display indicates ANS/FAX.
Any incoming voice calls will be answered by the answering
machine. The caller can then leave a message on the answering
machine.
Previous Page
Next Page