The machine cannot receive faxes manually, The machine will not transmit faxes, Make sure that the document is loaded face down – Xerox WorkCentre 470cx-9904 User Manual
Page 236: Check that the lcd display reads tx, You cannot poll another machine, The machine sending the fax may be faulty, Line errors due to excessive noise on phone line, Check your machine by making a copy
Book
TOC
Chapter
TOC
Search
7-16
The machine cannot
receive faxes manually.
Ensure that you are hanging up the handset
before you press the Start/Enter
button.
NOTE: This applies only to Xerox
WorkCentre 470cx models equipped with a
telephone connected to the EXT jack on the
bottom of the machine.
The machine will not
transmit faxes.
• Make sure that the document is loaded
face down.
• Check that the LCD display reads TX.
• You may have hung up the handset of the
external phone before you pressed the
Start/Enter
button
.
• Ensure the machine you are sending to is
able to receive faxes.
You cannot poll another
machine.
The fax machine you are calling may be
using a poll code.
The document you are trying to retrieve is
not loaded into the remote machine.
Blank spaces or poor text
quality appear in
incoming faxes.
• The machine sending the fax may be
faulty.
• Line errors due to excessive noise on
phone line.
• Check your machine by making a copy.
• Try cleaning the print heads. See
Symptom
Solution
Previous Page
Next Page