Xerox WorkCentre 470cx-9904 - Manual (Page 55)

Book
TOC
Chapter
TOC
Search
1-49
3 Press 1 to select a 12 hour Clock Mode or, Press 2 to select a 24
hour Clock Mode.
Setting the Date and Time
The current date and time are shown in the display when the
machine is on and ready for use (Standby mode). The date and
time are printed on all faxes you send.
1 Press the Menu button, then press the Date & Time button
on the one-touch keypad. The current date and time are
displayed. A flashing cursor in the display prompts you to enter
the date.
2 Using the number keypad, enter the current date using a
MMDDYYYY date format. If you make a mistake, use the
right and left buttons to move the cursor to the digit you wish to
change.
After entering the date the flashing cursor will move into the
first digit of the time.
3 Using the number keypad, enter the current time. Remember to
enter the time according to the current Clock Mode setting (12
or 24 hour format). Refer to the previous section, CLOCK
MODE for details.
12-03-1998
04:06 (PM)
Previous Page Next Page