Spots or lines appear on received faxes, Check to see if the phone line is noisy – Xerox WorkCentre 470cx-9904 User Manual
Page 238
Book
TOC
Chapter
TOC
Search
7-18
Spots or lines appear on
received faxes.
• Check to see if the phone line is noisy.
• Check the print head in your machine by
making a copy.
• Check the transmitting machine for a dirty
scan glass.
The machine dials a
number, but fails to make
a connection with another
machine.
The other machine may be turned off, out of
paper, or cannot answer incoming calls.
Have the operator of the other machine
investigate the problem.
The machine is unable to
store a document in
memory.
There may be insufficient memory available
to store the document. If the display shows a
MEMORY FULL error message, delete any
documents you no longer need from the
memory, then try storing the document.
Blank areas appear at the
bottom of each page, or
on other pages, only a
small strip of text is
printed at the top of the
page.
Check the paper settings in the user option
setup. Refer to
.
Symptom
Solution
Previous Page
Next Page