Xerox WorkCentre 470cx-9904 - Manual (Page 18)

Book
TOC
Chapter
TOC
Search
1-12
Note: To power off the machine, unplug the power cord. Power
must be applied at all times if the machine is used as an unattended
fax machine.
Installing Ink Cartridges
Your machine is a dual cartridge Inkjet printer. You must use a
black and a color ink cartridge. When viewed from the front of the
machine, the Black Ink Cartridge installs in the right Cartridge
Holder while the Color Ink Cartridge installs in the left Cartridge
Holder. An optional Photo Ink Cartridge, which can be installed in
place of the Black Ink Cartridge, is also available.
When installing ink cartridges, you must provide specific
information to the WorkCentre 470cx about the cartridges you
install. This allows the printer to keep track of which cartridges
are installed and to gauge ink cartridge utilization. There are two
methods of entering this information. You may enter the required
information directly via the WorkCentre 470cx control panel or
you can update Ink Cartridge information using the WorkCentre
470cx Control Software and a PC.
The procedures in this section cover Ink Cartridge Installation
without using the WorkCentre 470cx Control Program. To install
Ink Cartridges using the WorkCentre 470cx Control Program,
refer to
The Xerox WorkCentre Control Program on page 5-26.
Previous Page Next Page