Xerox WorkCentre 470cx-9904 - Manual (Page 56)

Book
TOC
Chapter
TOC
Search
1-50
4 Press the Start/Enter button when the date and time
settings displayed are correct.
The display indicates the date and time you have set, then
returns to Standby mode.
Note: If an invalid number is entered, the machine beeps and
does not proceed to the next step. If this happens, enter the correct
number.
Setting the System ID (Your Number and Name)
In some countries you are required by law to indicate your fax
number on any fax you send. The System ID, including your
telephone number and name, will be printed at the top of each
page sent from your machine.
The System ID, including your telephone number and name, will
be printed at the top of each page sent from your machine.
1 Press the Menu button, then press the System ID button on
the one-touch keypad. SYSTEM NUMBER appears in the
LCD display. A flashing cursor in the display prompts you to
enter the telephone number.
Previous Page Next Page