Other settings – Xerox WorkCentre 470cx-9904 User Manual
Page 169
Book
TOC
Chapter
TOC
Search
5-36
Select the desired options in the Print Quality, Paper, and Font
Settings. Choose if desired: Print Fonts or Defaults.
Other settings:
• Graphics - Click Graphics to set the addressability in dots per
inch (dpi). The default is 75 dpi.
• CR - Click CR to select a carriage return mode. CR + LF
instructs the printer to perform a line feed (LF) after each
carriage return (CR). The default is CR Only.
• Text Scale Mode - Click Text Scale Mode to turn text scaling
on or off. Text Scale Mode affects the vertical line spacing of
your print job. For example, for a 216 x 279 mm (8.5 x 11 in.)
page with a 13 mm (1/2 in.) bottom margin, Off prints 63 lines
per page; On prints 66 lines per page.
Note:
When Perforation Skip is On, Text Scale Mode is ignored.
• Perforation Skip - Click Perforation Skip to turn Perforation
Skip on or off. Turning Perforation Skip on adds a 13 mm (1/2
in.) top margin to the print job.
• High Speed Printing - Click High Speed Printing to print at a
faster rate.
• Form Feed Timeout - Form Feed Timeout designates the
timeout period for form feed. The default is 15 seconds.
Previous Page
Next Page