Xerox WorkCentre 470cx-9904 - Manual (Page 81)

Book
TOC
Chapter
TOC
Search
3-5
Sending a Fax Using a One-Touch Number
1 Adjust the document guides to match the width of the
document.
2 Slide the document face down into the Automatic Document
Feeder until it is grasped and pulled into the machine.
3 Press the One-Touch button (01 through 20) to which you
assigned the telephone number you wish to call. For
information on storing numbers in memory, see
Configuring
Automatic Dialing Features on page 3-18.
The machine will scan the document and dial the number
automatically. When the remote fax machine answers, the
document will be transmitted automatically.
Sending a Fax Using a Speed Dial Number
1 Adjust the document guides to match the width of the
document.
2 Slide the document face down into the Automatic Document
Feeder until it is grasped and pulled into the machine.
3 Press the Speed/Dual button, then enter a two digit speed dial
location number. For information on storing numbers in
memory,
Speed Dialing on page 3-22.
4 Press the Start/Enter button to dial the number.
Previous Page Next Page