Adjusting speaker volume, Setting the clock mode, 2 press the up button two times – Xerox WorkCentre 470cx-9904 User Manual
Page 54: Clock mode appears on the lcd display
Book
TOC
Chapter
TOC
Search
1-48
Adjusting Speaker Volume
1
Press the
button on the front panel to adjust the speaker
volume. If you cannot hear a dial tone, check the phone line
connection.
2
The display indicates the current volume level. Press the
Up
or Down
button repeatedly until the desired loudness setting
is displayed. Loudness is set in the range from 1 through 7,
with 7 representing the loudest setting.
3
After choosing the desired volume level, press the
button to
return to the Standby mode.
Setting the Clock Mode
You can configure your machine to display time using either a 12
hour or 24 hour format.
1
Press the
Menu
button, then press the System Data (01)
button on the one-touch keypad. PAPER SIZE appears on the
display.
2
Press the
Up
button two times.
CLOCK MODE appears on the LCD display.
The display prompts you to select either a 12 hour or 24 hour
Clock Mode.
Previous Page
Next Page