Xerox WorkCentre 470cx-9904 User Manual
Page 71
Book
TOC
Chapter
TOC
Search
1-65
fax machine. When your machine begins to ring, do not answer
the call. The machine requires several rings to learn the pattern.
When the machine completes "learning," the LCD displays
END DRPD SETUP.
With the DRPD feature active, DRPD appears in the display
and the previously set reception mode is ignored. If you turn
DRPD off, the machine returns to any previously set reception
mode.
Note:
DRPD must be set up again if you re-assign your fax
number, or connect the machine to another telephone line.
After DRPD has been set up, call your fax number again to verify that
the machine answers with a fax tone, then have a call placed to a
different number assigned to that same line to be sure the call is
forwarded to the extension telephone or answering machine plugged
into the EXT. jack.
Previous Page
Next Page