Xerox WorkCentre 470cx-9904 - Manual (Page 63)

Book
TOC
Chapter
TOC
Search
1-57
You can use Right or Left buttons to select the desired
setting.
5 Press the Start/Enter button to store your choice in
memory.
You can exit from setup mode at any time by pressing the Stop
button. When you press the Stop button, the machine
stores the options you changed and returns to the Standby
mode.
Selectable Options
These instructions assume you’ve followed the steps listed in the
previous procedure, Setting an Option, and the machine is
prompting you to change one of the options listed below.
All of these options are menu settings accessed by the One-Touch
button 01, System Data.
• PAPER SIZE - Select the paper size you will be printing on.
Press 1 for letter (LTR), 2 for A4 size, or 3 to use legal (LGL)
size paper.
• MESSAGE CONF. - A message confirmation report showing
transmission information; whether the transmission was
successful, how many pages were sent, etc.
Previous Page Next Page