Receiving manually in tel mode – Xerox WorkCentre 470cx-9904 User Manual
Page 125
Book
TOC
Chapter
TOC
Search
4-5
Note:
To change the number of rings before the machine answers
an incoming call, see
To adjust ringer volume, press the Menu
button and the System
Setup (04) button on the One-Touch keypad. Ringer volume is the
first item displayed. Press the
Start/Enter
button
. Use the Up
or
Down
button
to set the desired loudness. Press the Stop
button twice to accept and exit.
3
If a fax signal is not sensed when the machine answers the call,
you will hear a second ringing tone indicating a voice phone
call.
4
Lift the external phone to answer the call. If the voice call is
not answered within a specified time, the machine will switch
to automatic fax reception mode.
Receiving Manually in TEL Mode
If you have an external phone connected to the EXT jack on the
left side of the machine, you can answer voice phone calls and
receive faxes manually.
1
Press the Receive button until the display indicates TEL.
2
Answer an incoming call by picking up the external phone.
Previous Page
Next Page