Xerox WorkCentre 470cx-9904 - Manual (Page 118)

Book
TOC
Chapter
TOC
Search
3-42
2 Press the Menu button .
3 Press the Polling button on the One-Touch keypad. The display
prompts you to choose one of the two polling options: TX
(Transmission Polling) and CONT. (Continuous Polling).
4 Press the Start/Enter button to confirm TX POLL. The
display prompts you to enter a 4-digit poll code.
Note: The poll code is preset to 0000 at the factory. This setting
represents no poll code.
5 If you want to use a poll code, enter a 4-digit code (except
0000).
6 Press the Start/Enter button.
Or
If you do not want to secure the transmission with a Poll code,
press the Start/Enter button when the display shows 0000
for TX-POLL CODE. If you previously entered a poll code,
and do not want one, you may enter 0000 and then press the
Start/Enter button.
The machine stores the document in memory. The display
shows a count of the number of pages being stored in memory
and the remaining memory capacity.
Previous Page Next Page