Paper skews or buckles, Make sure you are using the correct type of paper, Transparencies stick together in the paper exit – Xerox WorkCentre 470cx-9904 User Manual
Page 251: Envelopes skew or fail to feed correctly
Book
TOC
Chapter
TOC
Search
7-31
Paper skews or buckles
• Ensure there is not too much paper in the
APF. Depending on the thickness of your
paper, the APF can hold up to 100 sheets
of paper.
• Make sure the paper guide does not cause
the paper to bow in the APF.
• Make sure you are using the correct type
of paper.
• When loading paper, do not force the
paper down into the machine.
• Make sure the right side of the paper is
aligned with the right edge of the feeder,
and the left paper guide is set against the
left side of the paper.
• Make sure the envelope guide is not in the
envelope position.
Transparencies stick
together in the paper exit.
Use only the transparencies specially
designed for printer. Remove each
transparency as it exits from the printer.
Envelopes skew or fail to
feed correctly.
• Ensure that the envelope guide has been
turned upright to the envelope load
position.
• Ensure that the paper guide is against the
left side of the envelopes.
Symptom
Cause and Solution
Previous Page
Next Page