Xerox WorkCentre 470cx-9904 - Manual (Page 32)

Book
TOC
Chapter
TOC
Search
1-26
1 Place the paper in the Manual Paper Feeder and adjust the paper
guide to the width of the print material. Slide the paper guide to
the right until it lightly touches the stack of print media. Do not
tightly press the paper guide to the edge of the print media, the
guide may bend the media or prevent the media from feeding.
Note: Refer to Loading Paper on page 1-18 for specific
instructions on loading various types of media.
2 Ensure that the media is fed into the machine as far as it will go.
3 Press the Start/Enter button to start manual feeding of the
media. If you have more than one page to print, press the
Start/Enter button for each page.
Paper
Guide
Previous Page Next Page