Xerox WorkCentre 470cx-9904 - Manual (Page 244)

Book
TOC
Chapter
TOC
Search
7-24
Smudged or dark
characters. • Make sure you are using the correct type
of paper. Try another type of paper.
• Make sure the paper is straight and
unwrinkled.
• Let ink dry before handling the paper. You
can use ‘Dry Time Delay’ check box in
the print setting. See
Main Tab on page 5-
9 .
• Change the Print Quality setting to Normal
quality mode. See Main Tab on page 5-9 .
• The print head may need cleaning. See
Print Cartridge Nozzle Test on page 8-9 .
Characters with white
lines • The print cartridge may be running out of
ink. Replace the print cartridge. The
Status monitor shows the amount of ink
left in the cartridge.
• Remove and reinstall the print cartridge.
See Replacing the Ink Cartridge on page
8-18 .
• The print head may need cleaning. See
Print Cartridge Nozzle Test on page 8-9 .
• If printing on transparencies, try changing
the fill pattern in your application
software.
Symptom Cause and Solution
Previous Page Next Page