Xerox WorkCentre 470cx-9904 - Manual (Page 277)

Book
TOC
Chapter
TOC
Search
8-23
To align the cartridge using the control panel of your WorkCentre:
The Arrange Alignment menu settings provides an easy way to
check and adjust Ink Cartridge print head alignment.
To run the Arrange Alignment:
1 Press the Menu button , then press the Maintenance button
on the one-touch keypad. The display indicates SELF TEST ?.
2 Press the Down button. ARRANGE ALIGNMENT ?
appears in the LCD display.
3 Press the Start/Enter button. PRINTING... appears on the
LCD display.
The WorkCentre 470cx prints out a Cartridge Alignment
pattern sheet consisting of a series of four test patterns. The
patterns are designated A,B,C, and D. Each pattern is made up
of a series of lines which are individually numbered. By
selecting the straightest line from each pattern, you can
optimize the print head alignment.
After printing out the Cartridge Alignment sheet, the Cartridge
Maintenance set up menu appears on the LCD display.
The letter A located on the right end of the lower line in the
display corresponds to alignment test pattern A. The range of
CARTRIDGE MAINT.
<15> [0-30] A
Previous Page Next Page