Xerox WorkCentre 470cx-9904 - Manual (Page 89)

Book
TOC
Chapter
TOC
Search
3-13
machine dials the first telephone number and begins sending
the document.
Note: Only a single Group Dial number may be used per Memory
Transmission operation.
Delayed Transmission
You can configure your machine to send a fax at a specified time.
Up to 10 delayed transmission operations can be reserved in your
machine.
1 Place the document face down in the Automatic Document
Feeder. If desired, adjust the resolution and contrast. For
details, see
Resolution on page 3-27 and Contrast on page 3-28.
2 Press the Menu button , then press the Delay TX button on
the One-Touch keypad.
3 Enter the telephone number of the remote machine (up to 46
digits). There are several methods available to do this:
• Direct entry of the telephone number using the numeric
keypad.
• One-Touch keypad dialing of stored telephone numbers (see
One-Touch Dialing on page 3-18).
Previous Page Next Page