Set date and time, Press start, 5 press the button to confirm your settings – Xerox WorkCentre 470cx-9904 User Manual
Page 17
Book
TOC
Chapter
TOC
Search
1-11
2
The machine turns on and performs a self diagnostic test.
POWERING UP PLEASE WAIT appears on the LCD display.
If you are setting up the machine for the first time, or if the
machine has not been operated for an extended period of time,
it will emit an alarm sound and the Alarm LED will light. SET
DATE AND TIME, and PRESS START will appear on the
LCD display.
3
Press the
button. A flashing cursor will appear on the first
character of the date in the LCD display.
4
Enter the date and time using the Number Keypad. If you need
assistance entering characters using the Number keypad, refer
to
Entering Alphanumeric Characters
5
Press the
button to confirm your settings.
The WorkCentre 470cx returns to standby mode. If there are no
ink cartridges installed, ALL CART. EMPTY appears in the top
line of the display.
Note:
If you do not set the date and time, after a short period of
time the machine will automatically accept whatever date and time
are displayed on power up. It will then go into standby mode.
SET DATE AND TIME
PRESS START
Previous Page
Next Page