Current 12:30pm, Start 12:30pm – Xerox WorkCentre 470cx-9904 User Manual
Page 91
Book
TOC
Chapter
TOC
Search
3-15
6
The display prompts you to enter an ID for the transmission. If
you want to assign a name to the transmission, enter it using the
Number keypad. If not, proceed to Step 7.
For details on how to enter letters using the Number keypad,
see
Entering Alphanumeric Characters
7
Press the Start/Enter
button. The display shows the current
time on the upper line and prompts you to enter the time the fax
will be sent.
8
Using the Number keypad, enter the time the fax will be sent.
Use the
Up
or Down
button to switch between AM and
PM. If you set a time earlier than the current time, the
document will be sent at that time on the following day.
Note:
Remember to enter the time in either twelve or twenty-four
hour clock mode format, depending upon which mode you enabled.
For more information, see
9
After entering the time, press the Start/Enter
button.
10
The machine scans the document into memory, returns to
Standby mode and displays a reminder that a Delayed
Transmission is set.
CURRENT 12:30PM
START 12:30PM
Previous Page
Next Page