Overview of workcentre 470cx drivers, Software included with the workcentre 470cx, Software installation procedure – Xerox WorkCentre 470cx-9904 User Manual
Page 39: In windows 3.x, windows 95/98, or windows nt 4.0, 3 turn on your pc and start windows
Book
TOC
Chapter
TOC
Search
1-33
Overview of WorkCentre 470cx Drivers
Before the WorkCentre 470cx can interface with your computer,
you must install driver files. These drivers will enable your
computer to properly communicate with the WorkCentre 470cx
for printing and scanning operations.
All of the necessary drivers are contained on the CD included with
your WorkCentre 470cx.
Software Included With the WorkCentre 470cx
For your convenience, in addition to the driver files, the scanning
program Pagis Pro 2.0 (a suite of four scanning applications) is
also included on the CD ROM.
Software Installation Procedure
In Windows 3.x, Windows 95/98, or Windows NT 4.0
1
Make sure the Xerox WorkCentre 470cx is connected to your
computer.
2
Power off the WorkCentre 470cx by unplugging it from the
wall outlet.
3
Turn on your PC and start Windows.
Previous Page
Next Page