If you don’t want to assign a name, skip this step, To return to standby mode, press the stop button – Xerox WorkCentre 470cx-9904 User Manual
Page 95
Book
TOC
Chapter
TOC
Search
3-19
If you make a mistake while entering a number, use the Right
or Left
buttons to move the cursor under the wrong digit,
then enter the correct digit, or press the Search/Delete button.
3
The display asks you to enter a name. Using the Number
keypad, enter the desired name (up to 20 alphanumeric
characters). For information on how to enter names, see
Entering Alphanumeric Characters
Or
If you don’t want to assign a name, skip this step.
Note:
If you assign a name to the number, the name will appear in
the display whenever you press the One-Touch button.
4
Press the Start/Enter
button when the name appears
correctly or without entering a name.
The display prompts you to press another One-Touch button.
5
To assign another One-Touch number, press the desired One-
Touch button and repeat steps 2 through this step.
Or
To return to Standby mode, press the
Stop
button
.
Previous Page
Next Page