Xerox WorkCentre 470cx-9904 - Manual (Page 86)

Book
TOC
Chapter
TOC
Search
3-10
1 Press the Menu button .
2 Press the System Data button (01) on the One-Touch keypad.
3 Press the Down or Up buttons repeatedly until MESSAGE
CONF. appears in the display.
a) Press 1 to print a confirmation report automatically each
time you send a fax (ON).
Or
b) Press 2 to turn this feature off (OFF).
Or
c) Press 3 to print only when an error occurs and the
transmission was not successful (ERR).
If an error occurred during your fax transmission, an error
message appears in the display. If you receive an error message,
press the Stop button to clear the message and try to send the
document again.
For a listing of error messages and their meanings, see LCD
Display Error Messages on page 7-9.
Previous Page Next Page