Clean head, To run the clean head procedure – Xerox WorkCentre 470cx-9904 User Manual
Page 52
Book
TOC
Chapter
TOC
Search
1-46
10
Using the Number Keypad, enter the number of the line which
appears the straightest from Alignment pattern D.
11
Press the Start/Enter
button to confirm your selection and
return to normal operation.
Clean Head
The Clean Head procedure cleans the print nozzles and removes
any deposits that may impair printing functions.
To run the Clean Head Procedure:
1
Press the
Menu
button, then press the Maintenance button
on the one-touch keypad. The display indicates SELF TEST ?.
2
Press the
Up
button. CLEAN HEAD ? appears in the LCD
display.
3
Press the Start/Enter
button. PRINTING... appears on the
LCD display.
The WorkCentre 470cx prints a head cleaning test pattern. Note
the series of diagonal lines across the top and bottom of the test
pattern. Breaks within a line of the same color indicate a clogged
nozzle. Try running the Clean Head procedure again if you see
breaks in the diagonal lines.
Previous Page
Next Page