Cleaning the document scanner, 3 disassemble the white roller as follows – Xerox WorkCentre 470cx-9904 User Manual
Page 258
Book
TOC
Chapter
TOC
Search
8-4
Cleaning the Document Scanner
To keep your machine working properly, occasionally clean the
white roller, Automatic Document Feeder (ADF) rubber, and the
scanning glass. If they are dirty, documents sent to another fax
machine may not be clear.
1
Power off the WorkCentre 470cx by unplugging it from the
wall outlet.
2
Open the Control Panel by pulling lightly on the Control Panel
Cover assembly.
3
Disassemble the white roller as follows:
a)
Both ends of the white roller have plastic bushings that are
used to secure the roller in the machine. Pull the two
bushings slightly inward (A).
b)
Rotate the bushings until they reach a vertical position (B).
Previous Page
Next Page
This manual is related to the following products: