Xerox WorkCentre 470cx-9904 - Manual (Page 51)

Book
TOC
Chapter
TOC
Search
1-45
The letter A, located on the right end of the lower line in the
display, corresponds to alignment test pattern A. The range of
numbers bracketed in the center of the display line indicates the
range of valid pattern selection choices. The flashing number
on the left side of the display indicates the line from print
pattern A that is currently selected as optimal.
4 Using the Number Keypad, enter the number of the line which
appears the straightest from pattern A.
5 Press the Start/Enter button to confirm your selection. The
LCD panel updates and the set up screen for the Alignment B
test pattern is displayed.
6 Using the Number Keypad, enter the number of the line which
appears the straightest from pattern B.
7 Press the Start/Enter button to confirm your selection. The
LCD panel updates and the set up screen for the Alignment C
test pattern is displayed.
8 Using the Number Keypad, enter the number of the line which
appears the straightest from pattern C.
9 Press the Start/Enter button to confirm your selection. The
LCD panel updates and the set up screen for the Alignment D
test pattern is displayed.
Previous Page Next Page