Xerox WorkCentre 470cx-9904 - Manual (Page 87)

Book
TOC
Chapter
TOC
Search
3-11
Memory Transmission (Broadcasting)
With Memory Transmission (Memory TX), documents are stored
in memory and automatically sent to one or more remote stations.
Use this feature to send your documents to multiple locations.
You can store a maximum of ten fax numbers for a memory
transmission. If you need to send your fax to more than ten
locations, you can increase the number of fax locations dialed by
including a Group Dial number as one of the ten numbers.
After sending, the documents are automatically erased from
memory.
1 Adjust the document guides to match the width of the
document.
2 Slide the document face down into the Automatic Document
Feeder until it is grasped and pulled into the machine.
If necessary, adjust the resolution and contrast. For details, see
Resolution on page 3-27 and Contrast on page 3-28.
3 Press the Menu button , then press the Memory TX button
on the One-Touch keypad.
4 Enter the telephone number of the remote machine. There are
several methods available to do this:
• Direct entry of the telephone number using the numeric
keypad.
Previous Page Next Page